CV. Karunia Makmur Persada

sql
INCUBATOR
Hover to Zoom

08 Aug 2017
Germany
1 unit
IDR CALL

Specification of

Co2-Incubators (Model INCO2)

The rapid development in "biotechnology" requires appliances which can keep pace with it.
MEMMERT CO2 incubators had been developed for this purpose and will also meet these standards in future due to a close cooperation with those people working directly in this field.

What are the most important advantages of the MEMMERT-CO2-incubators?

* Electropolished stainless steel interior
* Integrated sterilization cyCLE at + 160 ° C for two hours (sterilization-not desinfection or decontamination – means that all microorganisms including spores are killed
* No sensors, shelves, mountings, etc. have to be removed during the sterilization cycle
* LED-display humidity exactly shows the set and actual humidity inside the chamber
* Time is money: the integrated fault diagnostics for temperature, CO2, humidity limit control or resp. humidity control for fast repair
-CO2 NDIR sensor *with auto-zeroing which compared to the thermal conductivity sensor has the advantage that immediately after switching on the CO2 incubator-the CO2 is measured reliably and indicated on the display. TC-sensors require the stabilising of the temperature inside the working chamber.
* Continuous gas supply by the integrated automatic change-over gas cylinder (standard)
* Double overheat safety device according to safety standards DIN 12880 – adjustable electronic overtemperature controller safety class 3.1 and temperature limiter class 1
* GLP-conforming documentation can either be done through the printer – parallel printer interface – or via PC – RS 232 RS 485 alternatively the Celsius software including 2000 without extra charge both being part of the standard delivery scope
* Last but not least works calibration certificate at 37 ° C was also included in the standard

 

Standard features:

* 3 models sizes 108, 153 and 246 litres
* Temperature range + 20 ° C up to + 45 ° C
* CO2 adjustable from 0% up to 20% with a setting accuracy of 0, 1%
* 2 connections with automatic change-over device for gas bottles
* CO2 infra-red absorption system with automatic zeroing
* Large-area heating on all sides
* Integrated sterilisation stage at + 160 ° C (set point wait dependent) for 2 hours-sterilisation (NOT DISINFECTION) without removal of sensors
* Doubled overheat safety by microprocessor overheat conTroller, adjustable (TWW) and temperature limiter TB safety device class 3.1 and class 1 according to DIN 12 880
* Stainless steel 1.4301, interior electropolished
* Serial interface incl. RS232 MEMMERT-software "Celsius 2000" or optional RS485 (no extra charge)
* Parallel printer interface for connection of an EPSON-compatible printer for documentation in accordance with GLP (Good Laboratory Practice)
* Works calibration certificate for one temperature: + 37° C

 

• Avoid condensation to the MEMMERT-CO2 incubators are additionally provided with:

* Integrated humidity limit control with digital display of relative humidity adjustable from 90-95% rh
* Option against extra charge: active humidity control adjustable from 40 to 97% rh via LED display – water shelves are omitted
* Additonal door heating

Overheat Safety Device

* Microprocessor controller overheat, adjustable (TWW) and temperature limiter (TB) protection class 3.1 and 1, according to DIN 12 880
* Audible and visual alarm system

 

Textured Stainless Steel Casing

* Fully insulated stainless steel door with double locking and 4-point adjustment
* Inner glass door with opening (8 mm dia.) to take gas samples
* Zinc plated steel Rear

Interior – Heating Concept

* Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, electropolished andhermetically welded

 

Temperature Range

* From + 20 ° C up to + 45 ° C, however at least 7 ° C above ambient temperature

Technical Data
Model Weight (kg) Size Casing
w x h x d (mm) Heating Interior Size
w x h x d (mm) Vol (l) Support Shelves Supplied/Available Stainless Steel Water Dish Available Voltage
INC108 70 710 x 778 x 550 560 x 480 x 400 108 3 1 115 V, 60 Hz
230 V, 60 Hz
INC153 90 630 x 938 x 650 480 x 640 x

Untuk pelayanan terbaik hubungi:

 

Ibu Waty

Mobile: 08137685 1098

_________________________________________

CV. KARUNIA MAKMUR PERSADA

KOMPLEK RUKO TRITURA VISTA  BLOK A , JL.  M. BASIR NO. A - 6 P. Masyhur, MEDAN 20143

TELP: 081376851098, 061-42779826, 42779836  Fax: 061-42779826

Email: wati@karuniamakmurpersada.com, karuniamakmur@yahoo,com

Website :karuniamakmur.indonetwork.co.id

                    www.coolboxdelta.com

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Request a Quote
Produk Siap di Pesan
Rp 0
1
Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot